漂亮人妻洗澡被公强 日日躁,亚洲最新观看免费小视频,午夜福利精品久久完整版,鸡巴插入屁股黄色的网站

產品分類
聯系人:劉水紅

電話:0755-82515004

手機:13760205028

公司地址:深圳市福田區深南中路3037號南光捷佳大廈
Email:liu56817@126.com
QQ:528642442
  • 產品名稱:Vermason 222547校準器

  • 產品型號:用于校準手腕帶和工鞋接地測試儀
  • 產品廠商:其它品牌
  • 產品文檔:
你添加了1件商品 查看購物車
簡單介紹:
Vermason 222547校準器 Calibration Unit for Vermason Wrist Strap and Footwear Tester用于校準手腕帶和工鞋接地測試儀適配儀器:222504, 222506,222507, 222562, 222563, 222564, 222565,Vermason(DESCO子品牌)
詳情介紹:

Vermason 222547校準器 Calibration Unit for Vermason Wrist Strap and Footwear Tester
用于校準手腕帶和工鞋接地測試儀
適配儀器:222504, 222506,222507, 222562, 222563, 222564, 222565
Vermason(DESCO子品牌)

Operation
The Tester Calibration Unit was specifically designedfor use in calibration of Vermason brand equipment.The following procedures will not cover adjustment of
the test equipment. For detailed information regardingadjustment of specific Vermason brand testers, pleasecontact Desco Europe Customer Service.

Frequency of recalibration should be based on thecritical nature of those ESD sensitive items handled andthe risk of failure for the ESD protective equipment andmaterials. In general, we recommend that calibration be
performed annually.

Testing the Compact Tester
WRIST STRAP CIRCUIT
1. Connect the 10 mm lead from the Calibration Unitto the wrist strap stud on the Compact Tester.
2. Select 715K FAIL LOW on the Calibration Unit.
3. Press and hold the Calibration Unit’s test probeon the Compact Tester’s test plate. The testershould indicate a FAIL LOW condition.
4. Select 785K PASS LOW on the Calibration Unitand repeat the test. The tester should indicate aPASS condition.
5. Select 33M PASS HIGH on the Calibration Unitand repeat the test. The tester should indicate aPASS condition.
6. Select 37M FAIL HIGH on the Calibration Unitand repeat the test. The tester should indicate aFAIL HIGH condition.

FOOTWEAR CIRCUIT
1. Connect the 10 mm lead from the Calibration Unitto the 10 mm footwear stud on the Compact Tester.
2. Select 715K FAIL LOW on the Calibration Unit.
3. Press and hold the Calibration Unit’s test probeon the Compact Tester’s test plate. The testershould indicate a FAIL LOW condition.
4. Select 785K PASS LOW on the Calibration Unitand repeat the test. The tester should indicate aPASS condition.
5. Select 33M PASS HIGH on the Calibration Unitand repeat the test. The tester should indicate aPASS condition.
6. Select 37M FAIL HIGH on the Calibration Unit andrepeat the test. The tester should indicate aFAIL HIGH condition

姓名:
電話:
您的需求:
 
乐山市| 通河县| 汨罗市| 双流县| 贡觉县| 凤山市| 长乐市| 岫岩| 玛纳斯县| 会东县| 东台市| 宽甸| 东至县| 广汉市| 台东县| 静乐县| 新乐市| 自治县| 忻州市| 平潭县| 辰溪县| 遵义市| 连平县| 河池市| 莒南县| 梅河口市| 齐河县| 黄山市| 如皋市| 唐海县| 贡嘎县| 洪湖市| 舟山市| 靖江市| 莫力| 鲁山县| 敖汉旗| 泸州市| 新竹市| 泗水县| 红桥区|